Display removal of an installation without a permit

Please note in particular our information under:

  • Short text

    Special information for - City of Kevelaer

    The removal of installations that are exempt from procedures in accordance with Section 62 (1) BauO NRW, free-standing buildings of building classes 1 and 3 and other installations that are not buildings with a height of up to 10 m is exempt from procedures.

    The building owner can apply for a building permit procedure to be carried out for the aforementioned procedures.

    In addition, the client must notify the building supervisory authority in text form at least one month in advance of the intended removal of installations.

    In the case of non-freestanding buildings, an authorized person in accordance with Section 54 (4) BauO NRW must assess and provide evidence to the required extent that the building or buildings to which the building to be removed is attached are stable during and after removal. If necessary, the removal must be supervised by the qualified structural engineer.

  • Who should I contact?

    Special information for - City of Kevelaer

    Contact persons for Kevelaer - Wetten - Winnekendonk:

    Mr. Armin Zocher

    Mrs. Sandra Bolle

    Mrs. Simone Paternoga

    Contact person I Kervenheim - Kervendonk:

    Mrs. Hildegard Spickermann

    Contact person I Twisteden:

    Mr. Ahmed Al Obaid

  • Applications / Forms


Responsible organizational units

Help with accessibility

  • General

    We endeavor to make our websites accessible. You can find details on this in our accessibility statement. You can send us suggestions for improvement via our feedback form Report accessibility.

  • Font size

    To adjust the font size, please use the following key combinations:

    Larger

    ⌘command
    +

    Smaller

    ⌘command
    –

    Larger

    Ctrl
    +

    Smaller

    Ctrl
    –
  • Keyboard navigation

    Use TAB and SHIFT + TAB to navigate through next/previous links, form elements and buttons.

    Use ENTER to open links and interact with elements.

  • Contrast mode

    Press the following key combination to reduce or increase the contrast:

    Enlarge

    ⌃control
    ⌥option
    ⌘command
    .

    Decrease

    ⌃control
    ⌥option
    ⌘command
    ,
    Note: The shortcuts must be activated in the system settings of the operating system.

    Press the left ALT key + left SHIFT key + PRINT to quickly switch the high contrast mode on or off.

  • Invert colors

    Press the following key combination to switch the color inversion on and off:

    ⌃control
    ⌥option
    ⌘command
    8
    Note: The shortcuts must be activated in the system settings of the operating system.

    First activate the screen magnifier and then switch the color inversion on and off with the following key combinations:

    1. screen magnifier

    +

    2. invert colors

    Ctrl
    Old
    I
  • Screen magnifier

    Press the following key combinations to use the screen magnifier:

    Switch on/off

    ⌥option
    ⌘command
    8

    Enlarge view

    ⌥option
    ⌘command
    =

    Reduce view

    ⌥option
    ⌘command
    –
    Note: The shortcuts must be activated in the system settings of the operating system.

    Switch on / Enlarge view

    +

    Reduce view

    –

Select language